4 Tier Shovel Rack 500kg: Long Handle Tool Storage for Fire Cache & Public Works
A tool room with shovels stacked in a corner is a tool room where handles get cracked, blades get bent, and crews…
A tool room with shovels stacked in a corner is a tool room where handles get cracked, blades get bent, and crews waste ten minutes hunting for the right rake. Long handle tools – McLeod rakes, fire shovels, Pulaski axes, snow shovels, pickaxes, spike mauls – need a rack built for their shape: tall, narrow, open, and heavy enough to hold steel-handled tools without tipping.
This page covers the four-tier long handle tool rack we build in Luoyang, Henan: the spec sheet, who uses it, and why dedicated storage beats general shelving for tool rooms.
What this rack is
A freestanding, four-shelf steel rack with a slotted bottom level designed to hold long handle tools upright. Upper shelves take boxes, helmets, gloves, and smaller equipment. The bottom slots keep shovel and rake handles separated so tools do not tangle or lean on each other.
| Spec | Value |
|---|---|
| Overall size | 2000 mm (H) × 2000 mm (W) × 600 mm (D) |
| Material | Cold-rolled steel sheet, electrostatic powder coating |
| Capacity | 500 kg distributed load |
| Colors | Military green, gray-white (custom colors available) |
| Assembly | Tool-free, boltless keyhole assembly, about 30 minutes |
| Mobility | Optional heavy-duty casters, lockable |
| Bottom level | Slotted dividers for long handle tools (shovels, rakes, axes, bars) |
| Warranty | 1 year |
Why a dedicated long handle tool rack
General-purpose shelving stores boxes well and handles poorly. Long handles stick out past the shelf edge, block aisles, and get caught by passing carts. The three problems that dedicated racks solve:
- Handle damage. Tools leaning against each other crack wooden handles and scratch powder coating. Upright slots keep every tool separate
- Retrieval time. A slotted rack shows every handle at a glance. Crews grab the right tool in seconds instead of pulling three wrong ones out of a pile
- Floor safety. Tools off the floor means no trip hazards and no blades underfoot
For fire agencies there is a second reason: standards. The National Wildfire Coordinating Group’s PMS 448 and USDA Forest Service handbook FS 0351 both cover fire equipment storage and refurbishing, and cache managers are measured against orderly, accessible tool rooms. A rack built for long handle tools is the practical way to meet that expectation.
Built for the tool room
- Slotted bottom level – dividers spaced to hold shovel blades, rake heads, and axe handles upright without tangling
- Keyhole-style boltless assembly – uprights with punched slots, beam hooks lock in without screws; re-position shelf heights in minutes when your tool mix changes
- 500 kg distributed capacity – steel handles and bundled tools are heavy; this rack is rated for full tool-room loads, not garage-duty shelves
- Mobile option – lockable casters let a cache crew roll the whole rack to the truck bay for loading, then back into storage
- Powder-coated military green or gray-white – standard agency colors; custom colors for department branding
Who uses this rack
- Wildland fire caches (NFES/NIFC) – McLeod rakes, fire shovels, Pulaski axes, combi tools. The slotted bottom holds fire tools upright per PMS 448 storage practice
- Municipal public works departments – snow shovels, ice chippers, rakes, road crew tools; racks go in before winter season
- Fire stations – shovels, axes, hooks, and emergency hand tools in the equipment room
- Railroad maintenance-of-way section houses – spike mauls, lining bars, claw bars; upright storage keeps track tools accounted for
- Golf course and parks maintenance barns – bunker rakes, sand pro rakes, shovels for grounds crews
- Emergency management warehouses – shovels, picks, and hand tools staged for disaster response deployment
FAQ
How many long handle tools fit on this rack?
The slotted bottom level holds 10–14 long handle tools depending on blade width, plus four upper shelves for boxes, helmets, and small equipment. A typical fire cache stores a full crew set on two racks.
Does the rack come with wheels?
Castors are an option, not standard. The fixed version sits on leveling feet; the mobile version has four lockable heavy-duty casters.
Can shelf heights be adjusted?
Yes. Shelves hook into keyhole slots at 50 mm intervals, so you reposition them without tools when your stored items change.
Is this rack suitable for outdoor storage?
The powder coating resists rust and weather, but like all steel racks it lasts longer indoors or under cover. For full outdoor exposure, specify the galvanized option.
Do you make custom sizes for tool rooms?
Yes. Width, height, shelf count, and slot spacing are made to order. OEM and ODM orders are accepted.
Built by Luoyang Hengna
This tool rack is produced by Luoyang Hengna Office Furniture Co., Ltd., a steel storage manufacturer in the Luoyang Pangcun steel furniture industrial zone, Henan, China. Cold-rolled steel coils go through automated roll forming, punching, and a full powder coating line in our factory. Load ratings and slot layouts are confirmed against production drawings before manufacture, and every rack is assembled and checked before packing. OEM specs, custom colors, and full container orders are welcome.
Tell us your tool mix and room dimensions via the contact page – we will confirm the rack layout and slot spacing for your crew.
